Articles & News Stories

Growing Under Glass Choosing and Equipping a Greenhouse, Growing Plants.pdf

Description
Download Growing Under Glass Choosing and Equipping a Greenhouse, Growing Plants.pdf
Published
of 79
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Share
Transcript
  Types of greenhouses and frames 1 Greenhouses vary greatly in size, shape and type to meet the widely different demands of gardeners. This wide choice is not always helpful to the beginner, who is often thoroughly confused by the variety of shapes and materials. The basic factors which must be considered are what the greenhouse is to be used for, the amount of money available, and where the greenhouse is to be erected. When buying a greenhouse, carefully assess the amount of growing space required. There are two ways of measuring growing space. The first is a simple calculation of the soil or bench area available, which tells how many plants may be accommodated. Simply multiply the length of the greenhouse by the breadth, taking account of the space taken up by paths, doors and equipment such as heaters and water tanks. The second way of calculating space is to consider the growing area in conjunction with the height at the eaves and the height at the ridge. These two dimensions affect first the amount of growing space for tall plants, such as tomatoes, shrubs and climbers, and second ease of access and comfort in use. In general, the larger the greenhouse the cheaper each unit of growing space becomes, though this is less apparent in those models where the walls slope inwards. All too often the beginner chooses a greenhouse which in time proves to be too small. If cost dictates a small greenhouse to start with, make sure it is a model to which extra sections can be added. Shapes and styles Greenhouses are either free-standing or lean-to, that is, supported on one side by a house or other wall. Free-standing houses may have straight or inward sloping walls. Roof shapes may be a simple span, hipped or double-hipped curvilinear. The mini lean-to is a structure much narrower than the usual lean-to greenhouse. They are useful for the small garden or where wall space is at a premium. The smallest ones are too narrow to enter and maintenance of the plants is done from the outside. On sunny walls overheating can be a problem in summer. During recent years greenhouse manufacturers have been seeking more srcinal designs, and as a result circular and domed styles have come on to the market. These usually have flat oblong wall panels but some also are geodesic in structure, miniature versions of the vast space-dome-like Clima-tron greenhouse at the Missouri Botanic Garden. Some of the more recent designs have curved glass panels and an overall shape that suggests the great Palm House at Kew Gardens in London. Certain circular styles have decided aesthetic appeal and can become a feature or focal point in the garden. In addition they contain a surprising amount of space, as the central path of a traditional oblong structure is done away with. At present however, they are more expensive in terms of growing space than structures of traditional shape.  Types of greenhouses and frames 2 Another departure from the traditional greenhouse is the use of a framework of tubular alloy or steel supporting a cover made of plastic sheeting. Early models, still much used commercially, are called tunnel houses. Smaller versions of this simple pattern are available for the amateur, and welded frameworks in a variety of shapes are made. Generally these have a traditional outline but some are dome-shaped. Plastic houses are cheaper than glass-clad ones but have drawbacks in use (see pages 10 and 11). Design Greenhouses can be fully glazed, or they can have one or more sides boarded or bricked up to staging height. Both styles have advantages, and the choice must depend upon the use to which the greenhouse is to be put. If crops are to be grown in the border, glass to ground is needed for light. If most plants will be grown in pots, a staging is essential and the wall area beneath it can be made solid. Brick, wood or asbestos-cement half walls provide useful insulation, cutting the heating requirements of the greenhouse. A compromise is to board the north wall only, gaining some insulation with little effect on light values. Removable wooden insulation panels are made for some designs of greenhouse. These can be fitted in winter and removed when crops are to be grown in the bed. Kick boards should be fitted at the base of glass-to-ground walls to protect against accidental damage. The crucial factors in the choice of shape are accessibility, light transmission, and stability and durability. Commercially-available greenhouses can be expected to be stable, though the site must be taken into account in choosing a design. Plastic-covered houses, for instance, are less durable in very windy places. Accessibility covers factors such as door design, which is dealt with on page 9, and heights at eaves and ridge pole. Low-built houses can be raised on a home-made plinth of brick, wood or concrete to give extra headroom. Light transmission is critical only in winter and early spring, for during the summer months more light is available than is needed by the plants. Thus light is only of concern when planning very early crops. Mobile greenhouses Commercial growers use mobile greenhouses of the Dutch light type, which can be pulled on a system of rails over crops. These allow a crop rotation program to be followed. For example, salad crops can be started on one site in spring, then left to mature in the open while the house is moved onto a new site where tomatoes are grown. Frames It is less easy to vary the overall design of a garden frame and the basic traditional shape is still frequently met with. This is a shallow oblong box with one end higher than the other and sloping sides shaped to hold a lid or light of glass or plastic. A useful size is  Types of greenhouses and frames 3 4 x 6 ft. Double and multiple frames of this design can be obtained. Variations include double span tops and glass walls with a number of different patented methods of opening. Light-weight metal or plastic frames can be moved around the garden and placed on ordinary beds in different positions as required. Traditional forms have permanent bases of brick or wood. Frames can be built along the sides of half- , boarded greenhouses in order to benefit from surplus warmth from the greenhouse. The simplest form of frame is just a light, a glass or plastic panel, placed over a shallow pit. This allows pot or container plants to be hardened off. Cloches Until comparatively recently, cloches were made as units or sections, each one like an open-ended greenhouse in miniature, fitting together to cover rows of crop plants. Made of sheets of glass and a variety of patented metal clips, they were cumbersome and breakable but very efficient. Rigid plastic sheeting has largely taken over from glass for this type of sectional cloche. The most recent development is the tunnel cloche made of strips of flexible plastic sheeting stretched over a series of wire hoops along a row and held in place with further hoops over the top. The ends are anchored firmly by burying them in the soil. Ventilation is by pushing up the plastic on the side away from the wind. The traditional cloche (a) was made of solid glass in a bell form. Class sheets joined with clips can be tent-shaped (b) or barn-shaped (c). Corrugated plastic sheeting (d) can be bent over rows of crops and anchored with wire hoops. Plastic tunnel cloches (e) consist of long plastic sheets bent over hoops and held with more hoops. Plastic sheet attached to wire frames forms a tent cloche (f). ebooksdownloadrace.blogspot.in
Search
Related Search
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks